How to Use Stick'ink Tattoo!
使用說明
選定適當的位置,清潔及抹乾該處皮膚
撕除紋身貼透明薄膜,將有膠的一面面向皮膚貼上(有顏色圖案的一面向外)
用力按壓,使紋身貼緊貼於皮膚之上
用濕布或濕紙巾,輕按紋身貼,使圖案完全轉移到皮膚之上
靜待10至20秒,小心撕起貼紙
此時正面的透明紋身圖案的應已轉移皮膚上
檢查透明的圖案是否完整及沒有移位
讓紋身貼區域保持乾燥至少15分鐘
一般情況下12-24小時後,圖案即時呈現飽滿的顔色
注意事項:
● 顯色時間及效果,因人而異
● 如發現圖案移位或損壞,請於5分鐘內把圖案用暖水洗去
● 紋身區域不要和其他外露的皮膚部位長時間接觸,以免把顏色轉移到其他皮膚部位 (紋身區域接觸衣物不會出現染色轉移的情況)
How to Use
Clean and pat dry the area on your skin you decided to wear the Stick’ink tattoo sticker.
Remove the transparent film on the sticker. Stick the side with the transparent graphic on the desired skin area with the colour printed graphic side facing out, press it to stick it firmly on the skin
Lightly press the tattoo sticker with wet towel or tissue paper
Let it sit for 10-20 seconds, remove the sticker carefully
The transparent tattoo graphic should be transferred onto the skin perfectly
Let the tattoo dry for at least 15 mins
Under normal condition, the graphic will be fully developed in 12-24 hours.
Points to note
● The time for colour development varies based on different conditions - skin conditions, humidity, tattoo area etc
● If you find that the transparent tattoo graphic is incomplete or disrupted during transfer, please remove the tattoo under warm water within 5 min.
● Please avoid prolonged contact with the non-tattoo skin area with the tattoo to prevent colour from diffusing onto other skin area. Contact with clothes will not cause the colour transfer nor dirt your clothes.